Achieving a Deeply Desodiated Stabilized Cathode Material by the High Entropy Strategy for Sodium-ion Batteries.

Manganese-based layered oxides are currently of significant interest as cathode materials for sodium-ion batteries due to their low toxicity and high specific capacity. However, the practical applications are impeded by sluggish intrinsic Na+ migration and poor structure stability as a result of Jahn-Teller distortion and complicated phase transition. In this study, a high-entropy strategy is proposed to enhance the high-voltage capacity and cycling stability. The designed P2-Na0.67Mn0.6Cu0.08Ni0.09Fe0.18Ti0.05O2 achieves a deeply desodiation and delivers charging capacity of 158.1 mA h g-1 corresponding to 0.61 Na with a high initial Coulombic efficiency of 98.2%. The charge compensation is attributed to the cationic and anionic redox reactions conjunctively. Moreover, the crystal structure is effectively stabilized, leading to a slight variation of lattice parameters. This research carries implications for the expedited development of low-cost, high-energy-density cathode materials for sodium-ion batteries.

Study of the Properties and Modification Mechanism of SBS-Modified Asphalt by Dry Process.

SBS (styrene-butadiene-styrene block copolymer) is a thermoplastic elastomer with properties most similar to rubber. SBS asphalt modifier is mainly composed of a styrene-butadiene-styrene block copolymer with a certain amount of additives and stabilizers. SBS-modified asphalt binder has always been the most commonly used pavement material both domestically and internationally. However, conventional wet-process SBS-modified asphalt binder requires manufacturers to produce it in advance and transport it to a mixing plant for blending. This has provided an opportunity for unscrupulous businesses to reduce the amount of SBS by adding other substances, allowing inferior asphalt binder to pass inspections undetected. At the same time, conventional wet-process SBS-modified asphalt tends to undergo phase separation and experience a decline in performance as the storage time increases. However, dry-process SBS-modified asphalt can be directly added at the mixing plant, effectively addressing the issues associated with conventional wet-process SBS-modified asphalt. It also helps to reduce environmental pollution to a certain extent. This study investigates the extraction process of dry-process SBS-modified asphalt binder. It clarifies the performance and modification mechanisms of two types of dry-process SBS-modified asphalt binder at different dosages through various testing methods, including basic indicators, rheological properties, infrared spectroscopy, and fluorescence microscopy. The results indicate that due to the incorporation of oil, crosslinker, solubilizer, and other substances into dry-process SBS modifier, there is a small amount of chemical reaction with asphalt in the melting process. The high- and low-temperature properties and fatigue properties of the two dry-process SBS-modified asphalt binders at a 7% dosage are close to wet SBS-modified asphalt binder at a 5% dosage.

Dual-ion conductors: from liquid to solid.

The traditional working principle within lithium-ion batteries relies on Li+ shuttling between the cathode and anode, namely the rocking-chair mechanism. A single working ion constrains the possibilities for battery design and the selection of electrode materials, while realizing multiple working ions offers the potential to break through the fundamental principles of traditional battery construction. Accordingly, it is necessary to develop dual-ion conductors to enable the migration of multiple working ions. This focus article starts by introducing traditional dual-ion batteries based on liquid electrolytes and their pros and cons. Then, solidifying liquid dual-ion conductors is expected to overcome these drawbacks, so the development of solid dual-ion conductors is discussed in detail. Specifically, basic design principles of solid dual-ion conductors are briefly proposed, including constructing continuous ion transport channels and choosing appropriately sized ion carriers. The potential applications of solid dual-ion conductors are also summarized, such as stabilizing the electrode/electrolyte interface and activating additional redox couples. The goal of this article is to inspire researchers in the development of dual-ion conductors and to contribute to the advancement of all-solid-state batteries.

A P2/P3 Biphasic Layered Oxide Composite as a High-Energy and Long-Cycle-Life Cathode for Potassium-Ion Batteries.

Layered transition metal oxides are extensively considered as appealing cathode candidates for potassium-ion batteries (PIBs) due to their abundant raw materials and low cost, but their further implementations are limited by slow dynamics and impoverished structural stability. Herein, a layered composite having a P2 and P3 symbiotic structure is designed and synthesized to realize PIBs with large energy density and long-term cycling stability. The unique intergrowth of P2 and P3 phases in the obtained layered oxide is plainly characterized by X-ray diffraction refinement, high-angle annular dark field and annular bright field-scanning transmission electron microscopy at atomic resolution, and Fourier transformation images. The synergistic effect of the two phases of this layered P2/P3 composite is well demonstrated in K+ intercalation/extraction process. The as-prepared layered composite can present a large discharge capacity with the remarkable energy density of 321 Wh kg-1 and also manifest excellent capacity preservation after 600 cycles of K+ uptake/removal.

Atomic-Resolution In Situ Exploration of the Phase Transition Triggered Failure in a Single-Crystalline Ni-Rich Cathode.

Single-crystalline cathode materials LiNixCoyMn1-y-zO2 (x ≥ 0.6) are important candidates for obtaining better cyclic stability and achieving high energy densities of Li-ion batteries. However, it is liable to initiate phase transitions inside the grains during electrochemical cycling, and the processes and regions of these phase transitions have remained unknown. In this research, we conducted an intrinsic study, investigating the chemicals and microstructural evolution of single-crystalline LiNi0.83Co0.11Mn0.06O2 using in situ biasing transmission electron microscopy at an atomic scale. We observed that the layered structure on the surface of the single-crystalline material was degraded during the charging process, resulting in continuous phase transitions and the formation of surface oxygen vacancies, which can reduce both the structural and thermal stability of the material. Uneven delithiation led to the formation of high-density defects and discontinuous inactive electrochemical phases, such as local antiphase boundaries and the rock salt phase, in the bulk of the material. The non-uniformity of the structure and the coexistence of active and inactive phases introduce significant tensile stress, which can lead to intragranular cracks inside the grains. As the number of cycles increases, the structural degradation caused by the intragranular phase transition will further increase, ultimately affecting the cycling capacity and stability of the battery. This work has broad implications for creating lithium-ion batteries that are effective and long-lasting.

Universal Design Strategy for Air-Stable Layered Na-Ion Cathodes toward Sustainable Energy Storage.

Na-ion batteries (NIBs) are sustainable alternatives to Li-ion technologies due to the abundant and widely-distributed resources. However, the most promising cathode materials of NIBs so far, O3 layered oxides, suffer from serious air instability issues, which significantly increases the manufactural cost and carbon footprint because of the long-term use of dry rooms. While some feasible strategies are proposed via case studies, universal design strategies for air-stable cathodes are yet to be established. Herein, the air degradation mechanisms of O3 cathodes are investigated via combined first-principles and experimental approaches, with bond dissociation energy proposed as an effective descriptor for predicting air stability. Experimental validations in various unary, binary, and ternary O3 cathodes confirm that the air stability can indeed be effectively improved via simple compositional design. Guided by the predictive model, the designed material can sustain 30-day air-storage without structural or electrochemical degradation. It is calculated that such air-stable cathodes can significantly reduce both energy consumption (≈4 100 000 kWh) and carbon footprint (≈2200-ton CO2) annually for a 2 GWh NIBs manufactory. Therefore, the fundamental understandings and universal design strategy presented open an avenue for rational materials design of NIBs toward both elemental and manufactural sustainability.

From Oxygen Redox to Sulfur Redox: A Paradigm for Li-Rich Layered Cathodes.

The utilization of anionic redox chemistry provides an opportunity to further improve the energy density of Li-ion batteries, particularly for Li-rich layered oxides. However, oxygen-based hosts still suffer from unfavorable structural rearrangement, including the oxygen release and transition metal (TM)-ion migration, in association with the tenuous framework rooted in the ionicity of the TM-O bonding. An intrinsic solution, by using a sulfur-based host with strong TM-S covalency, is proposed here to buffer the lattice distortion upon the highly activating sulfur redox process, and it achieves howling success in stabilizing the host frameworks. Experimental results demonstrate the prolonged preservation of the layered sulfur lattice, especially the honeycomb superlattice, during the Li+ extraction/insertion process in contrast to the large structural degeneration in Li-rich oxides. Moreover, the Li-rich sulfide cathodes exhibited a negligible overpotential of 0.08 V and a voltage drop of 0.13 mV/cycle, while maintaining a substantial reversible capacity upon cycling. These superior electrochemical performances can be unambiguously ascribed to the much shorter trajectories of sulfur in comparison to those of oxygen revealed by molecular dynamics simulations at a large scale (∼30 nm) and a long time scale (∼300 ps) via high-dimensional neural network potentials during the delithiation process. Our findings highlight the importance of stabilizing host frameworks and establish general guidance for designing Li-rich cathodes with durable anionic redox chemistry.

Molecular Engineering Enabling High Initial Coulombic Efficiency and Rubost Solid Electrolyte Interphase for Hard Carbon in Sodium-Ion Batteries.

Hard carbon (HC) as a potential candidate anode for sodium-ion batteries (SIBs) suffers from unstable solid electrolyte interphase (SEI) and low initial Coulombic efficiency (ICE), which limits its commercial applications and urgently requires the emergence of a new strategy. Herein, an organic molecule with two sodium ions, disodium phthalate (DP), was successfully engineered on the HC surface (DP-HC) to replenish the sodium loss from solid electrolyte interphase (SEI) formation. A stabilized and ultrathin (≈7.4 nm) SEI was constructed on the DP-HC surface, which proved to be simultaneously suitable in both ester and ether electrolytes. Compared to pure HC (60.8 %), the as-designed DP-HC exhibited a high ICE of >96.3 % in NaPF6 in diglyme (G2) electrolyte, and is capable of servicing consistently for >1600 cycles at 0.5 A g-1 . The Na3 V2 (PO4 )3 (NVP)|DP-HC full-cell with a 98.3 % exceptional ICE can be cycled stably for 450 cycles, demonstrating the tremendous practical application potential of DP-HC. This work provides a molecular design strategy to improve the ICE of HC, which will inspire more researchers to concentrate on the commercialization progress of HC.

A Flexible and Stretchable MXene/Waterborne Polyurethane Composite-Coated Fiber Strain Sensor for Wearable Motion and Healthcare Monitoring.

Fiber-based flexible sensors have promising application potential in human motion and healthcare monitoring, owing to their merits of being lightweight, flexible, and easy to process. Now, high-performance elastic fiber-based strain sensors with high sensitivity, a large working range, and excellent durability are in great demand. Herein, we have easily and quickly prepared a highly sensitive and durable fiber-based strain sensor by dip coating a highly stretchable polyurethane (PU) elastic fiber in an MXene/waterborne polyurethane (WPU) dispersion solution. Benefiting from the electrostatic repulsion force between the negatively charged WPU and MXene sheets in the mixed solution, very homogeneous and stable MXene/WPU dispersion was successfully obtained, and the interconnected conducting networks were correspondingly formed in a coated MXene/WPU shell layer, which makes the as-prepared strain sensor exhibit a gauge factor of over 960, a large sensing range of over 90%, and a detection limit as low as 0.5% strain. As elastic fiber and mixed solution have the same polymer constitute, and tight bonding of the MXene/WPU conductive composite on PU fibers was achieved, enabling the as-prepared strain sensor to endure over 2500 stretching-releasing cycles and thus show good durability. Full-scale human motion detection was also performed by the strain sensor, and a body posture monitoring, analysis, and correction prototype system were developed via embedding the fiber-based strain sensors into sweaters, strongly indicating great application prospects in exercise, sports, and healthcare.

Molecular Engineering toward Robust Solid Electrolyte Interphase for Lithium Metal Batteries.

Lithium-metal batteries (LMBs) with high energy density are becoming increasingly important in global sustainability initiatives. However, uncontrollable dendrite seeds, inscrutable interfacial chemistry, and repetitively formed solid electrolyte interphase (SEI) have severely hindered the advancement of LMBs. Organic molecules have been ingeniously engineered to construct targeted SEI and effectively minimize the above issues. In this review, multiple organic molecules, including polymer, fluorinated molecules, and organosulfur, are comprehensively summarized and insights into how to construct the corresponding elastic, fluorine-rich, and organosulfur-containing SEIs are provided. A variety of meticulously selected cases are analyzed in depth to support the arguments of molecular design in SEI. Specifically, the evolution of organic molecules-derived SEI is discussed and corresponding design principles are proposed, which are beneficial in guiding researchers to understand and architect SEI based on organic molecules. This review provides a design guideline for constructing organic molecule-derived SEI and will inspire more researchers to concentrate on the exploitation of LMBs.

Comprehensive Multiomics Analyses Establish the Optimal Prognostic Model for Resectable Gastric Cancer : Prognosis Prediction for Resectable GC.

BACKGROUND: Prognostic models based on multiomics data may provide better predictive capability than those established at the single-omics level. Here we aimed to establish a prognostic model for resectable gastric cancer (GC) with multiomics information involving mutational, copy number, transcriptional, methylation, and clinicopathological alterations. PATIENTS AND METHODS: The mutational, copy number, transcriptional, methylation data of 268, 265, 226, and 252 patients with stages I-III GC were downloaded from the TCGA database, respectively. Alterations from all omics were characterized, and prognostic models were established at the individual omics level and optimized at the multiomics level. All models were validated with a cohort of 99 patients with stages I-III GC. RESULTS: TTN, TP53, and MUC16 were among the genes with the highest mutational frequency, while UBR5, ZFHX4, PREX2, and ARID1A exhibited the most prominent copy number variations (CNVs). Upregulated COL10A1, CST1, and HOXC10 and downregulated GAST represented the biggest transcriptional alterations. Aberrant methylation of some well-known genes was revealed, including CLDN18, NDRG4, and SDC2. Many alterations were found to predict the patient prognosis by univariate analysis, while four mutant genes, two CNVs, five transcriptionally altered genes, and seven aberrantly methylated genes were identified as independent risk factors in multivariate analysis. Prognostic models at the single-omics level were established with these alterations, and optimized combination of selected alterations with clinicopathological factors was used to establish a final multiomics model. All single-omics models and the final multiomics model were validated by an independent cohort. The optimal area under the curve (AUC) was 0.73, 0.71, 0.71, and 0.85 for mutational, CNV, transcriptional, and methylation models, respectively. The final multiomics model significantly increased the AUC to 0.92 (P < 0.05). CONCLUSIONS: Multiomics model exhibited significantly better capability in predicting the prognosis of resectable GC than single-omics models.

High Entropy-Induced Kinetics Improvement and Phase Transition Suppression in K-Ion Battery Layered Cathodes.

Layered oxides are widely accepted to be promising cathode candidate materials for K-ion batteries (KIBs) in terms of their rich raw materials and low price, while their further applications are restricted by sluggish kinetics and poor structural stability. Here, the high-entropy design concept is introduced into layered KIB cathodes to address the above issues, and an example of high-entropy layered K0.45Mn0.60Ni0.075Fe0.075Co0.075Ti0.10Cu0.05Mg0.025O2 (HE-KMO) is successfully prepared. Benefiting from the high-entropy oxide with multielement doping, the developed HE-KMO exhibits half-metallic oxide features with a narrow bandgap of 0.19 eV. Increased entropy can also reduce the surface energy of the {010} active facets, resulting in about 2.6 times more exposure of the {010} active facets of HE-KMO than the low-entropy K0.45MnO2 (KMO). Both can effectively improve the kinetics in terms of electron conduction and K+ diffusion. Furthermore, high entropy can inhibit space charge ordering during K+ (de)insertion, and the transition metal-oxygen covalent interaction of HE-KMO is also enhanced, leading to suppressed phase transition of HE-KMO in 1.5-4.2 V and better electrochemical stability of HE-KMO (average capacity drop of 0.20%, 200 cycles) than the low-entropy KMO (average capacity drop of 0.41%, 200 cycles) in the wide voltage window.

The impact of total factor mobility on rural-urban symbiosis: Evidence from 27 Chinese provinces.

The rational flow and optimal allocation of urban and rural factors is the key to solving the problem of unbalanced and insufficient urban and rural development. This study draws on the theory of ecological symbiosis to examine the mechanism of factor flow and urban-rural symbiosis. It analyzes panel data from 27 Chinese provinces and autonomous regions between 2010 and 2020 to empirically demonstrate the influence of labor, capital, technology, and land mobility on urban-rural symbiosis. The study found that: (1) The relationship between the total factor flow and urban-rural symbiosis is U-shaped nonlinear, and the time when cities feed the development of rural areas has come; (2) The impact of labor factor flow on urban-rural symbiosis exhibits an inverted U-shaped relationship, the impact of capital factor flow displays a positive U-shaped relationship, the impact of land factor flow shows an inverted U-shaped relationship, and the impact of technical factor flow on urban-rural symbiotic development is not significant. (3) The factor flow exerts a region-oriented impact on the level of urban-rural symbiosis. In developed areas, total factor flow does not affect urban-rural symbiosis, but the level of labor flow and the urban-rural symbiosis demonstrates an inverted U-shaped relationship, the flow of technological factors has a U-shaped impact on the urban-rural symbiosis level, the flow of land factors and the urban-rural symbiosis show an inverted U-shaped relationship, and the flow of capital factors has no impact on the urban-rural symbiosis relationship. In underdeveloped areas, the impact of the total factor flow on urban-rural symbiosis shows a significantly positive U-shaped characteristic, the labor mobility level and urban-rural symbiosis show an inverted U-shaped relationship, the flow of capital factors has a U-shaped impact on the urban-rural symbiosis level, and the flow of lands and technology does not have a remarkable impact on urban-rural symbiosis in underdeveloped areas.

Impact of automatic acquisition of key clinical information on the accuracy of electrocardiogram interpretation: a cross-sectional study.

BACKGROUND: The accuracy of electrocardiogram (ECG) interpretation by doctors are affected by the available clinical information. However, having a complete set of clinical details before making a diagnosis is very difficult in the clinical setting especially in the early stages of the admission process. Therefore, we developed an artificial intelligence-assisted ECG diagnostic system (AI-ECG) using natural language processing to provide screened key clinical information during ECG interpretation. METHODS: Doctors with varying levels of training were asked to make diagnoses from 50 ECGs using a common ECG diagnosis system that does not contain clinical information. After a two-week-blanking period, the same set of ECGs was reinterpreted by the same doctors with AI-ECG containing clinical information. Two cardiologists independently provided diagnostic criteria for 50 ECGs, and discrepancies were resolved by consensus or, if necessary, by a third cardiologist. The accuracy of ECG interpretation was assessed, with each response scored as correct/partially correct = 1 or incorrect = 0. RESULTS: The mean accuracy of ECG interpretation was 30.2% and 36.2% with the common ECG system and AI-ECG system, respectively. Compared to the unaided ECG system, the accuracy of interpretation was significantly improved with the AI-ECG system (P for paired t-test = 0.002). For senior doctors, no improvement was found in ECG interpretation accuracy, while an AI-ECG system was associated with 27% higher mean scores (24.3 ± 9.4% vs. 30.9 ± 10.6%, P = 0.005) for junior doctors. CONCLUSION: Intelligently screened key clinical information could improve the accuracy of ECG interpretation by doctors, especially for junior doctors.

A prototype of dual-ion conductor for all-solid-state lithium batteries.

All-solid-state batteries (ASSBs) represent a promising battery strategy to achieve high energy density with great safety. However, inadequate kinetic property and poor interfacial compatibility remain great challenges, which impede their practical application. A prototype of dual-ion conductor of Li+ synchronized with Cu+ unlocks a four-electron redox reaction with high reversibility and fast kinetics. As a result, the constructed ASSB exhibited a high reversible capacity of 603.0 mA·hour g-1 and an excellent cycling retention of 93.2% over 1500 cycles. Moreover, because of the ion highway connecting active materials and catholytes constructed by dual-ion conductor, remarkable temperature tolerance (-60°C) and excellent rate performance (231.6 mA·hour g-1 at 20 mA cm-2) were achieved. The superior electrochemical performance can be ascribed to the migration pathway with small energy barrier and low tortuosity once the Cu+ introduced into Li6PS5Cl. This work creates a unique perspective of ASSBs with dual-ion conducting strategy, thus inspiring a potential developing strategy of state-of-the-art ASSBs.

Sabatier Relations in Electrocatalysts Based on High-entropy Alloys with Wide-distributed d-band Centers for Li-O2 Batteries.

Li-O2 battery (LOB) is a promising "beyond Li-ion" technology with ultrahigh theoretical energy density (3457 Wh kg-1 ), while currently impeded by the sluggish cathodic kinetics of the reversible gas-solid reaction between O2 and Li2 O2 . Despite many catalysts are developed for accelerating the conversion process, the lack of design guidance for achieving high performance makes catalysts exploring aleatory. The Sabatier principle is an acknowledged theory connecting the scaling relationship with heterogeneous catalytic activity, providing a tradeoff strategy for the topmost performance. Herein, a series of catalysts with wide-distributed d-band centers (i.e., wide range of adsorption strength) are elaborately constructed via high-entropy strategy, enabling an in-depth study of the Sabatier relations in electrocatalysts for LOBs. A volcano-type correlation of d-band center and catalytic activity emerges. Both theoretical and experimental results indicate that a moderate d-band center with appropriate adsorption strength propels the catalysts up to the top. As a demonstration of concept, the LOB using FeCoNiMnPtIr as catalyst provides an exceptional energy conversion efficiency of over 80 %, and works steadily for 2000 h with a high fixed specific capacity of 4000 mAh g-1 . This work certifies the applicability of Sabatier principle as a guidance for designing advanced heterogeneous catalysts assembled in LOBs.

A Bio-Inspired Trehalose Additive for Reversible Zinc Anodes with Improved Stability and Kinetics.

The moderate reversibility of Zn anodes, as a long-standing challenge in aqueous zinc-ion batteries, promotes the exploration of suitable electrolyte additives continuously. It is crucial to establish the absolute predominance of smooth deposition within multiple interfacial reactions for stable zinc anodes, including suppressing side parasitic reactions and facilitating Zn plating process. Trehalose catches our attention due to the reported mechanisms in sustaining biological stabilization. In this work, the inter-disciplinary application of trehalose is reported in the electrolyte modification for the first time. The pivotal roles of trehalose in suppressed hydrogen evolution and accelerated Zn deposition have been investigated based on the principles of thermodynamics as well as reaction kinetics. The electrodeposit changes from random accumulation of flakes to dense bulk with (002)-plane exposure due to the unlocked crystal-face oriented deposition with trehalose addition. As a result, the highly reversible Zn anode is obtained, exhibiting a high average CE of 99.8 % in the Zn/Cu cell and stable cycling over 1500 h under 9.0 % depth of discharge in the Zn symmetric cell. The designing principles and mechanism analysis in this study could serve as a source of inspiration in exploring novel additives for advanced Zn anodes.

Toward High Performance Anodes for Sodium-Ion Batteries: From Hard Carbons to Anode-Free Systems.

Sodium-ion batteries (SIBs) have been deemed to be a promising energy storage technology in terms of cost-effectiveness and sustainability. However, the electrodes often operate at potentials beyond their thermodynamic equilibrium, thus requiring the formation of interphases for kinetic stabilization. The interfaces of the anode such as typical hard carbons and sodium metals are particularly unstable because of its much lower chemical potential than the electrolyte. This creates more severe challenges for both anode and cathode interfaces when building anode-free cells to achieve higher energy densities. Manipulating the desolvation process through the nanoconfining strategy has been emphasized as an effective strategy to stabilize the interface and has attracted widespread attention. This Outlook provides a comprehensive understanding about the nanopore-based solvation structure regulation strategy and its role in building practical SIBs and anode-free batteries. Finally, guidelines for the design of better electrolytes and suggestions for constructing stable interphases are proposed from the perspective of desolvation or predesolvation.

Recent Progress on Honeycomb Layered Oxides as a Durable Cathode Material for Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) are becoming promising candidates for energy storage devices due to the low cost, abundant reserves, and excellent electrochemical performance. As the most important unit, layered cathodes attract much attention, where honeycomb-layered-oxides (HLOs) manifest outstanding structural stability, high redox potential, and long-life electrochemistry. Here, recent progress on HLOs as well as Na3 Ni2 SbO6 and Na3 Ni2 BiO6 as two representative materials are introduced, and the crystal and electronic structure, electrochemical performance, and modification strategies are summarized. The advanced high nickel HLOs are highlighted toward development of state-of-the-art sodium-ion batteries. This review would deepen the understanding of superstructure in layered oxides, as well as structure-property relationship, and inspire more interest in high output voltage, long lifespan sodium-ion batteries.